86-371-68797756
No. 57, Huichang New Village, Zhannan West Road, Xingyang, Zhengzhou, Henan, China (Mainland)
Yuli Quartz tube is special industrial technology glass made from silicon dioxide and is one kind of excellent basal material.
Quartz glass has series of excellent physical and chemical characteristics:
1.Heat resisting: The soften point of quartz glass is 1730 degree, can be used long time under 1100 degree. And the highest using temperature can get to 1450 degree in very short time.
2. Corrosion resisting: Quartz glass will not react with any acid material except hydrofluoric acid. Its acid resisting ability is 30 times of the ceramic, and 150 times of the stainless steel. Especially for its chemical stability under high temperature is much better than any other engineering materials.
3. Good heat stability: The coefficient of thermal expansion of quartz glass is very small. It can bear exquisite changing of temperature. Heat up quartz glass to 1100 degree, then put into normal temperature water and it will not be broken.
4. Capability of pervious to light is better: Quartz glass has better pervious capability in the whole spectral wave band from ultraviolet radiation to infrared. The penetrate rate of visible light is up to 93%, especially in the area of ultraviolet radiation the largest rate is more than 80%.
5. Insulated capability of electricity is better: The resistance value of quartz glass is 10 thousand times of common glass what is the best insulated material of electricity, even in high temperature it still has better electric capability.
6. Used for electric lamp: House, semiconductor, light communication, martial industry, metallurgy, building material, chemical, machinery, electricity power, environmental protection and so on.
Further processing:
Flame polishing, optical polishing, grind, general polishing. two sides polishing, one side polishing and the other side grind. We can process the quartz plate as your requirement
Material properties:
High purity
High durability
Both sides polished
Flame polished the edges
Working temperature: 1100°C=2012°F
Precision:
Range of OD | OD | WT | Siding | Out of Round | Bow/1000mm |
10mm Max | ±2.00% | ±10% | 12% | 2.0% | 2.0mm |
10 - 20mm | ±1.25% | ±8% | 10% | 1.5% | 2.0mm |
20 - 30mm | ±1.00% | ±10% | 15% | 1.5% | 2.0mm |
30 - 50mm | ±1.00% | ±10% | 15% | 1.5% | 2.0mm |
50 - 100mm | ±1.00% | ±12% | 15% | 2.0% | 2.0mm |
100 - 200mm | ±1.00% | ±12% | 15% | 2.0% | 2.0mm |
Corrosion amaunt:
H2SO4 | Density 1.84,2h,20°C,g/cm2 | 1.4*10-8 |
HNO3 | Density 1.4,2h,20°C,g/cm2 | 5*10-8 |
HCL | Density 1.19,2h,20°C,g/cm2 | 15*10-8 |
NaOH | 1%,2h,110°C,g/cm2 | 166*10-6 |
KOH | 1%,2h,98°C,g/cm2 | 68*10-6 |
Thermal properties:
CoefficientofExpansion(20°C~350°C) | 5.5*10-7/°C |
Thermal Conductivity(W/m°C,20°C) | 1.4 |
Specific Heat(J/kg,20°C) | 670 |
Softening Point( viscosity) | 1730°C |
Annealing Point | 1215°C |
Deformation Temperature(long time heat retaining) | 1120°C |
Mechanical properties:
Density g/cm3 | 2.2 |
Compression Strength N/mm2 | 1100 |
Bending Strength N/mm2 | 67 |
Tension Strength N/mm2 | 48 |
Micro Hardness N/mm2 | 8600~9800 |
Moh's hardnessMoh's hardness | 5.5~6.5 |
Electrical properties:
Electrical Resistivity(350°C,omh-cm) | 7*107 |
Insulating Strength(20°C,KV/cm) | 250~400 |
Dielectric Constant | 3.7 |
