86-371-68797756
No. 57, Huichang New Village, Zhannan West Road, Xingyang, Zhengzhou, Henan, China (Mainland)
YL-Bogie-Hearth furnace is periodic operating furnace, mainly used for heating treatment of the medium and small specialty castings and special artifacts, etc.
YL-Bogie-Hearth furnace has the following components: furnace body, car, heating elements, furnace floor material, door, temperature control system, control cabinet, temperature controller, power thyristor, compensation wire, thermocouple, supporting electrical wait.
Features & specifications:
Structure | 1) Furnaces for temperatures up to 1100 °C, 1300°C. 1600°C. 2) Robust case designs, fiberous liner with ventilation port 3) Stable bogie-hearth with single-flanged rail wheels. 4) Heating elements in the bogie hearth covered with resistance wire, silicon carbide or MoSi2 heating elements plates 5) High-quality insulation refractory with low power consumption 6) 1400°C, 1800°C grade heating elements wound on ceramic tubes with Max. evergy saving |
Chamber Dimensions | Width×Height×Depth --(100—3000)×(100—3000)×(100—3000)mm, |
Working temperature | 100℃--1100℃, 100℃--1300℃, 100℃--1600℃(continuous) 1200℃, 1400℃, 1700℃(less than 3 hours) |
Power | 0.5—200KW |
Voltage | 110 -440V Single or three Phase 50/60 Hz |
Thermal couples | K or S or B type |
Stability at 1000 °C | +/- 0.5 °C |
Uniformity at 1000 °C | +/- 2.0 °C |
Max. Heating Rate | 50°C/ min |
Temperature Control | 1) PID automatic control and auto-tune function. 2) 30 programmable segments for precise control. 3) Built-in over temperature alarm and protection allows for operation without attendant. 4) +/- 1 ºC temperature accuracy. 5) K, S, B type thermocouple installed for immediate use. |
Lift door | hoist (speed 8m/min) |
Trolley drive | motor drive, self-propelled |
Application Notes | 1) For preserving the longevity of the furnace components, we recommend the heating rate not to exceed 10 °C /min. 2) Cooling rate shall also not exceed 10 °C /min. 3) This furnace lacks vacuum sealing, toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision. 4) Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating. |
Warranty | One year limited warranty |
We also can produce any specification furnaces according to your detailed requirements | |
